> Passive elements>Heatsinks>Heat transfer compounds>Electrolube thermally conductive rubber, TCOR series>TCR 75 S

Manufacturers

TCR 75 S

highly thermally conductive rubber 1.79W/mK

• is a applied between components that may overheat and heat sinks to ensure rapid heat transfer
• combines the properties of silicone rubber pads with those of a conventional heat transfer paste, and can be used as a low bond strength adhesive, sealant or gasketing compound
• good chemical resistance
• good electrical insulation characteristics
• moisture cure
• thermal conductivity: 1.7W/mK
• colour: white
• tensile strength: 2MPa
• elongation at break: 300%
• temperature range (short term): -50...+200°C (250°C)
• specific gravity/density: 2.3g/ml
• dielectric strength: >8kV/mm
• electrical insulation: 1x1014W/cm
• skin forming rate: 10...15min.
• cure time (20°C): 24h

TCR 75 S

TCR 75 S

30112 TCR 75 S TCOR75S TCOR75S highly thermally conductive rubber 1.79W/mK. • is a applied between components that may overheat and heat sinks to ensure rapid heat transfer• combines the properties of silicone rubber pads with those of a conventional heat transfer paste, and can be used as a low bond strength adhesive, sealant or gasketing compound• good chemical resistance• good electrical insulation characteristics• moisture cure• thermal conductivity: 1.7W/mK• colour: white• tensile strength: 2MPa• elongation at break: 300%• temperature range (short term): -50...+200°C (250°C)• specific gravity/density: 2.3g/ml• dielectric strength: >8kV/mm• electrical insulation: 1x1014W/cm• skin forming rate: 10...15min.• cure time (20°C): 24h

Specifications

manufacturer
Manufacturer's name TCOR75S
Data Sheet

Unit price

53,29 €

Stock: 18
Next incoming goods:
CW 28/2024
5 units

Further delivery:
CW 35/2024